RP Advanced C2 Strike Mobility Commander

The choice for C2/C4 mobility at CO, BN, BDE or Division level.

Field Ready

Aluminum up fits make the vehicle tough and lightweight.

Deployable Now

Vehicle Expected Available by Mid May 2013.

Heavy Duty Bed

Aluminum Rear Bed has Ammo/Fuel can holder mounts in multiple locations.

Rear Tailgate

Rear tailgate has positive locking mechanism and multiple tie down points.

Exclusive Lower Bed

The exclusive lower bed of the RP C2 Commander allows for nearly 5,000 cubic inches of additional storage.

‹ ›

VISIT OUR SOFIC PAGE HERE

The Newly developed RP Advanced Strike Mobility Commander is based on the commercially available Can-Am Commander 1000cc side-by-side with modifications designed for the mission specific requirements of the US Military and government agencies. The factory bumpers, suspension, tires, seats and cargo area have all been replaced by RP Advanced Mobile Systems components for longer life and better suitability to the specific requirements of the customer. This vehicle will be one of the first vehicles to utilize RP�s new Fatigue Mitigation MOLLE Tactical Seat system; along with their SOF Series II 12-Ply Run-Flat Tires and Beadlock Wheels as well as an available electrical support system to allow prolonged operation of communications equipment while the vehicle engine is not running. (Download Press Release)

Up-Fit Components
• Beadlock Wheel, Black, CC 14x7 [4+3] 4/137
• RP SOF Series II 12-Ply Run Flat Tire 26x9x14, Black
• RP Keyless Anti-Theft Ignition System
• RP Fatigue Mitigation Warfighter MOLLE Tactical Seat System (1000 Denier CORDURA)
• Severe Duty 4-Point Retractable Harness Kit with Quick Release Rotary Buckle
• RP Hard Armor Coating
• Blackout/Infrared Capability for NVG Operations
• RP Modular Ammo/Fuel Can/Payload Assembly
• High-Capacity, Multi-Modal Tactical Payload Flatbed Assembly
• Rear Push Bumper Assembly with Aerial Tie-downs
• High-Load Tactical Team Standoff Nerf Bar Assembly/Rock Slider with Stow Mode for Air Transport
• 12VDC to 24VDC Converter for Military Equipage
• 110AC Single Phase Inverter for Toughbook and Accessory utilization
• Electrical Support System (NVG Capable) for Extended Duration Power (12VDC and 24VDC)
• NATO compatible receptacle for vehicle slaving/Accessory Operations
• MSI Defense Series 2.5 Body Suspension Components

Engine
• Type: 976cc, V-twin, liquid-cooled, SOHC, 8-valve (4-valve/cyl).
• Bore & Stroke: 91 x 75 mm.
• Fuel System: iTC with EFI and 54mm Throttle Body, 2 Siemens∞ VDO injectors.
• Starting System: Electric.
• Transmission: CVT, sub-transmission with high, low, park, neutral & reverse. Standard engine braking.
• Drive Train: Selectable 2WD/4WD shaft driven with Visco-Lok† front differential.

Chassis
• Frame: Steel
• Cage type: 2-inch diameter, high-strength steel, ROPS-approved
• Steering wheel adjustment: Adjustable tilt steering
• Front Suspension Type/Shocks: Double A-arm with dive-control geometry / Motion Control shocks
• Front Suspension Travel: 10 in (254 mm)
• Rear Suspension Type/Shocks: Torsional Trailing arm Independent (TTI) with external sway bar/ Motion Control shocks
• Rear Suspension Travel: 10 in (254 mm)
• Front Brakes: Dual 214 mm ventilated disc brakes with hydraulic twin-piston calipers
• Rear Brake: Single 214 mm ventilated disc brake with hydraulic twin-piston caliper
• Tires/Front: RP SOF Series II 12-Ply Run Flat Tire 26x9x14, Black
• Tires/Rear: RP SOF Series II 12-Ply Run Flat Tire 26x9x14, Black
• Wheels: Steel Black (or Aluminum Bead Locks)

Dimensions
• L x W x H (in): 118.3 x 58.6 x 72 (before mods)
• L x W x H (mm): 3,004 x 1,489 x 1,829 mm (before mods)
• Rear RP Bed (in): 28 x 49 x 11.75 in
• Rear RP Lower Box (in): 21 x 25 x 9 in
• Wheelbase: 75.8 in (1,924 mm)(before mods)
• Ground Clearance: 11 in (279 mm)(before mods)
• Dry Weight: 1,295 lb (585 kg)(before mods)
• Towing Capacity: 1,500 lb (680 kg)
• Cargo Box Capacity: Total: 600 lb (272 kg) Upper: 400 lb (181 kg) Lower: 200 lb (91 kg)(before mods)
• Cockpit Storage: Glove Box: 4.5 gal (17.2 L) Under driver seat: 3,5 gal (13,1 L)(before mods)
• Fuel Capacity: 10 US gal (37.8 L) (estimated 200 mile range)
• Under 14' Turning Radius (even tighter with Optional Rear Open Differential)

Features
• Color(s) Available: Flat Black, Desert Sand, Olive Drab Green
• Instrumentation: Speedometer, tachometer, odometer, trip and hour meters, fuel, gear position, sport mode, seat belt and 4x4 indicator, diagnostics, clock, auto shut off
• Electrical: Prewired for Warn winch from Can-Am
• Lighting: 4 60-watt projectors with tail lights/brake light
• 3 x DC Outlets (15A)
• 4x 110v AC Outlets with C2 Package

Warranty
• Up to 36 month warranty available

Package
• NEW Dynamic Power Steering (DPS™)
• Visco-Lok† QE auto-locking front differential
• Optional Rear Open Differential (ROD) Available
• Front and Rear MSI Defense Series 2.5 Body Suspension Components
• Front sway bar
• 14-in. aluminum beadlock wheels
• 26x9x14 RP SOF II Run Flat Tire

Contact us for additional information on this vehicle, or if you are interesting in getting a proposal for a Can-Am Commander modified by RP Advanced Mobility for your specific mission requirements.
(Contact Us)   or  (Download Press Release)